If your home has lots of items to weave around, then an upright is probably a more convenient choice than a cylinder vacuum..
The easiest way to remove a blockage is to push a thin broom handle through the hose.Even if this doesn’t completely remove a blockage, it should loosen it enough for the vacuum to suck it up when you switch it back on.. As with all the steps on this process, it’s important not to use too much force though.
You don’t want to damage the hose walls.You also shouldn’t use anything sharp.. 4.. Clean Inside The Hose.Now that any large blockages have been removed, the next step is to wash the hose.
This helps to remove dirt, grime, and other odorous substances from inside the house.. Rinse the inside of the hose with cold water in a sink.This is also a good time to clean patches of dirt on the exterior of the hose..
Fill the sink with a few inches of water mixed with washing up liquid.
Submerge the hose and gently move it around, so that water gets everywhere inside..Carpet sweepers are mechanical devices that were around before vacuums existed, and many people still have them hanging around their houses.
Here are the steps required to clean your carpets using this method:.Remove any large to medium-sized bits of debris from the carpet surface by hand..
– Use the carpet sweeper to remove small bits of debris from the carpet or rugs..– Repeat the process with the sweeper to remove finer dust or debris..